Steel ATV and UTV accessories designed, welded, and powder coated in Pine City, Minnesota. This collection covers cargo racks, bucket holders, chainsaw and auger carriers, bed boxes, hitches, winch mounts, and plow systems, with fitment for Polaris, Can-Am, Honda, Yamaha, Kawasaki, Arctic Cat, John Deere, Bobcat, and Kubota machines. Every product is backed by a 30 day try it policy and a 2 year warranty, with free U.S. shipping on orders over $100.
Your machine is a tool. This is the gear that turns horsepower into work done.
What's in this collection?
Everything here solves a hauling, pulling, or plowing problem on a four wheeler or side by side. The main groups:
Carrying gear. Bucket holders keep a five gallon bucket of feed or fence staples upright on washboard trails instead of in the ditch. Chainsaw holders and auger carriers lock down the tools that don't belong loose on a rack. Rear cargo racks, bed extensions, and bed boxes add the capacity your machine didn't come with.
Pulling and mounting. ATV hitches and UTV hitches add receiver capability where the factory left it off. Winch mounts put line pull where the job needs it: front, bed, upper, or rear.
Plowing. ATV snowplow systems with welded blades, not bolt-together kits, built for driveways that see real Minnesota winters.
Working the land. Purpose-built tools like the Fence Stretcher, which stretches wire with the machine instead of a hand tool. Nobody else makes it.
How does the receiver system work?
Most Herc accessories mount through a complete receiver based system that works like the hitch on your truck. Mount one base on your machine, then swap attachments in minutes: bucket carrier, chainsaw kit, auger carrier, cargo basket, plow. No drilling, no dedicated hardware for every accessory. One base turns the same machine from chore rig to ice rig before your coffee gets cold.
Will it fit my machine?
Shop by brand to see exactly what mounts to your machine: Polaris, Can-Am, Honda, Yamaha, Kawasaki, John Deere, Bobcat, and Kubota. Or shop by the job: farm and agriculture, ice fishing, hunting, and lawn and garden. Fitment details live on every product page, and our FAQ and install videos show real installs before you buy.
Why buy ATV and UTV accessories from Herc Outdoors?
Herc Outdoors is the consumer brand of Product Fabricators, a precision fabrication shop in Pine City, Minnesota. Every rack, hitch, and plow in this collection is designed, cut, welded, powder coated, and assembled under one roof, then tested on our own machines on real farms, trails, and lakes. Cheap imported racks bend, rattle, and rust out in a season. Herc gear is built to outlast the machine it bolts to, and the 30 day try it policy plus 2 year warranty exist so that claim costs you nothing to test.
Frequently asked questions
What size receiver does my ATV or UTV need?
Most ATVs run a 1 1/4 inch receiver and most UTVs run a 2 inch, but it varies by make and model. Check the receiver opening on your machine or the fitment list on the product page before ordering. Herc makes hitches and attachments for both sizes.
Do I have to drill into my machine to install Herc accessories?
No. Herc gear uses clamp-on and receiver-based mounting designed around factory racks, beds, and hitch points. Each product page lists what's included and how it mounts, and the install videos show the process step by step.
Are Herc ATV and UTV accessories made in the USA?
Yes. Every Herc product is designed, cut, welded, powder coated, and assembled in Pine City, Minnesota by Product Fabricators, the fabrication shop behind the brand.
What if it doesn't work on my machine?
Run it for 30 days on your machine, on your land, in your weather. If it doesn't install clean, haul hard, and hold up, send it back under the try it policy. Everything also carries a 2 year warranty.
Can one hitch base run multiple attachments?
Yes, that's the point of the receiver system. One mounted base accepts the bucket carrier, chainsaw kit, auger carrier, plow, and other attachments, swapped in minutes without tools.