Steel bumper-mounted storage for RVs and campers, designed, welded, and powder coated in Pine City, Minnesota. This collection covers lockable cargo trunks, gear and cooler racks, fuel racks, steps, and bolt-on bumper receivers, with fitment for Winnebago, Forest River, Jayco, Lance, Grand Design, Keystone, and Northland rigs. Every product is backed by a 30 day try it policy and a 2 year warranty, with free U.S. shipping on orders over $100.
Your camper never has room for everything. This is where the cooler, the fuel, and the gear you don't want inside ride instead.
What's in this collection?
Everything here adds carrying capacity your rig didn't come with, mounted to the bumper or frame instead of eating floor space inside.
Lockable storage. Cargo trunks like the RV Trunk Lock'R and Bumper Mount Trunk Lock'R keep sewer hoses, tools, and camp gear locked up, dry, and out of the camper.
Open racks. Cooler and storage racks carry the bulky stuff: coolers, totes, firewood, the generator. Fuel racks get gas cans out of the living space and into open air where they belong.
Mounting and access. The bolt-on bumper and frame mount receiver converts your bumper to accept standard 2 inch hitch accessories, so one mount runs the Receiver Lock'R Basket, the Hitch Storage Rack, and other receiver gear. Steps make getting in and out of the rig easier at the campsite.
How do Herc RV accessories mount?
Two ways: direct bumper mounting, or through the bolt-on receiver that turns your bumper or frame into a standard 2 inch receiver point. Both are bolt-on installs with no welding and no drilling into the camper body. Each product page lists exactly what's included and how it attaches, and our FAQ and install videos show real installs before you buy.
One thing that's on you: your RV manufacturer sets the load limit for your bumper and frame. Check your owner's manual before loading any bumper-mounted rack, and keep proper securing and safe loading part of every trip.
Will it fit my camper?
Shop by brand to see what mounts to your rig: Winnebago, Forest River, Jayco, Lance, Grand Design, Keystone, and Northland. Fitment details live on every product page.
Why buy RV accessories from Herc Outdoors?
Herc Outdoors is the consumer brand of Product Fabricators, a precision fabrication shop in Pine City, Minnesota. Every trunk, rack, and receiver in this collection is designed, cut, welded, powder coated, and assembled under one roof, then run on our own campers on real road trips. Thin imported racks rattle loose and rust out; Herc gear is welded steel built to outlast the rig it bolts to, and the 30 day try it policy plus 2 year warranty exist so that claim costs you nothing to test.
Frequently asked questions
How much weight can my RV bumper hold?
That depends on your rig, not on the rack. Your RV manufacturer sets the bumper and frame load limits, so check your owner's manual before loading any bumper-mounted accessory. Each Herc product page lists what that rack is built to carry.
Do I have to weld anything to install these?
No. Everything in this collection is a bolt-on install, either directly to the bumper or through the bolt-on bumper and frame mount receiver. The product pages and install videos walk through each setup.
Can I carry fuel cans on the outside of my camper?
That's exactly what the fuel racks are for: getting gas cans out of the living space and into open air. Use approved fuel containers, secure them properly, and follow your RV manufacturer's guidance on fuel transport.
Are Herc RV accessories made in the USA?
Yes. Every Herc product is designed, cut, welded, powder coated, and assembled in Pine City, Minnesota by Product Fabricators, the fabrication shop behind the brand.
What if it doesn't fit my rig?
Run it for 30 days on your camper, on your trips, in your weather. If it doesn't install clean, haul hard, and hold up, send it back under the try it policy. Everything also carries a 2 year warranty.